Purification

Pressure Sand Filter

This is a filtration system to remove fine suspended solids in the treated water. A pressure sand filter consists of a pressure vessel - this could be either vertical or horizontal-fitted with a set of frontal pipe work and valves, graded sand supported by layers of graded under bed consisting of pebbles and silex

Activated Carbon Filter

Activated carbon filters are used to remove chlorine, organic compound present in waste water. Removal of organics from potable water could be to prevent common organic acids such as humic or fulvic from reacting with chlorine to form trihalomethanes ( a class of known carcinogens)

Iron Remove Filter

We have carved out a position in manufacturing and supplying a wide range of highly efficient Iron Removal Filters. These are widely used in various industries to remove dissolved iron from water and have gained skyrocketing popularity in the market for their high performance and longer service life.

Water Softener

There are two types of Hardness present in water one is Temporary Hardness and another one is Permanent Hardness. Water is considered ‘hard’ (Temporary) when it has excessive levels of calcium and magnesium dissolved in it.

The high synthetic resin is used to exchange Sodium ion with hardness forming Calcium and Magnesium ions. After producing desired output, the resin is regenerated with (NaCI) Sodium Chloride solution after which unit is again ready to deliver next batch. RWT Series units are available with different models. The difference between these models is in the capacity of the resin used for each model. These units are easy to operate

Domestic RO

Capitalizing on the skills of our professionals, we are able to provide an unmatched quality assortment of Domestic RO. The offered membrane is manufactured by our vendors’ diligent professionals using highest quality raw materials and modular machines. Our offered membranes are widely demanded in the market due to their hassle free performance.

RO Plants

We offer a wide range of industrial reverse osmosis Plants, according to We need for tap water, brackish water & sea water application. The production range starts from 100 LPH (Liter per hour) to 100 M3 per hour for 100ppm to 45,000ppm TDS and reduce TDS @ 95-99%. All our industrial reverse osmosis Plants are carefully customized and configured to suit the individual requirement of the output water, which varies from normal drinking application to the specific usage, such as food Processing, pharmaceuticals and boiler feeding requirement. This is done through an in depth and complete chemical analysis of the feed water available to us in specific location. Reverse Osmosis has gained wide acceptance and popularity due to its simple operation and the ability to withstand variations in feed water quality.

Demineralized Plant

AWith full leverage on our expertise, we are influential in superior quality Demineralization Plant. Preferably used in power plants and treatment solutions, these products possess excellent functionality and long service life with low maintenance traits. Designed and fabricated in various specifications as per latest industrial standards, these are supplied to customers in accordance with their precise requirements.

Mixed Bed

GLOBAL GREEN TECH design and make mixed bed polishing units to suit all of customer’s need. Cation and Anion resins are combined in a MSRL of FRP vessel to produce ultra pure water. Usually a mixed bed unit contains strong acid Cation (SAC) resin and Weak base Anion (WBA) resins combined to a ratio of approximately 40% Cation resin to 60% Anion resin. (All resin volumes are dependent upon the feed water analysis and the required quantity of treated water).

Mixed bed polishers are typically installed when a water quality of less than 1 micro ohm conductivity is required. Normally mixed bed polishers are installed after a standard Reverse Osmosis or De mineraliser (DM Plant), to produce ultra high quality water. The Cation resins in mixed bed units are of a higher specific gravity and settle at the bottom of the vessel at the same time the Anion resin will automatically float to the top.
Please note: The Cation resin must be a strong acid Cation type (SAC) and the Anion resin must be a strong base Anion resin (SBA)

Water Structural Unit

Having a rich industrial experience, we are engaged in offering Water Structure Unit. These services are well planned and executed by the team of skilled professionals and efficient workers of the industry. These services are offered in an excellent manner and on a specific time period.

UF Plant

GLOBAL GREEN TECH offer wide range of UF systems as per customer requirement , we design Ultrafiltration plants for various applications like RO pre treatment, drinking water, ETP, STP and customised requirement.

Ultrafiltration is a separation process using membranes with pore sizes in the range of 0.1 to 0.001 micron. Typically, ultrafiltration will remove high molecular-weight substances, colloidal materials, and organic and inorganic polymeric molecules. Low molecular-weight organics and ions such as sodium, calcium, magnesium chloride, and sulfate are not removed. Because only high-molecular weight species are removed, the osmotic pressure differential across the membrane surface is negligible. Low applied pressures are therefore sufficient to achieve high flux rates from an ultra filtration membrane. Flux of a membrane is defined as the amount of permeate produced per unit area of membrane surface per unit time. Generally flux is expressed as gallons per square foot per day (GFD) or as cubic meters per square meters per day.

DM Plant

GLOBAL GREEN TECH DM Plants are designed based on latest cost effective ion exchange technique of counter current regeneration. The units consist of two corrosion free pressure vessels internally connected in series. The first column containing Cation absorbing exchanger and second column charged with an anion absorbing exchanger. The water flow Pass through the bed of a Cation exchanger then the bed of an anion exchanger and the systems remove dissolved salts from water to a specified degree.

Regeneration require after using total exchange capacity. The Cation Resin is regenerated with an acid and anion resin is regenerated with alkali solution. RWT consists of acid/alkali proof pressure vessel with internal fittings and initial charge of Cation and Anion exchanger, set of regeneration equipment, hydraulic ejectors, acid and alkali tanks and conductivity meter to monitor treated water quality. These DM Plants offer a practical range of capacities and flow rates necessary to serve wide variety of applications. Standard portable deionizers are Up flow two-bed type compact and simple to operate with conductivity meter to monitor quality of treated water continuously when in operation.